August 23, 2021

How to Remove a Garbage Disposal

Author

Update First Last in Content -> Business Text -> First Last field

Date

August 23, 2021

Share

There are several reasons you might need to permanently remove a garbage disposal from your  kitchen sink . Having a septic system, or experiencing issues with clogged drains, are the most common reasons.
Garbage disposals are not recommended for homes with septic systems. If you've had problems with a septic system, or you've moved into a home that has a septic system, it might be a good idea to remove the disposal. Similarly, kitchen drains that are prone to clogging may be challenged by a garbage disposal; it sends little bits of food down the drain, which might make clogging even more likely. In that case, it's safer to scrape off all food scraps into the compost or trash to keep your drains clear.
Fortunately, removing a garbage disposal and installing a sink strainer in its place is a job most homeowners can handle on their own.

Before You Begin

When you remove a garbage disposal without replacing it with a new one, you must install a new sink strainer, or basket strainer, in its place. You'll also need a new sink tailpiece, the vertical drain pipe directly below the strainer. In addition, you will likely need a new continuous waste pipe that extends from the tailpiece to the drain's P-trap or a tee (for double-basin sinks).
All of these parts are commonly available at home centers. They are inexpensive and easy to work with. If you have trouble fitting any of the new drain parts with the old, it costs very little to replace all of the drain parts leading to the branch drain in the wall or floor.
WARNING If your garbage disposal does not have an appliance cord plugged into an outlet, it is hard-wired and must be disconnected from the circuit wiring. Shut off the power to the disposal circuit at the circuit breaker before working on any wires. Consult an electrician about permanently disconnecting the disposal portion of the circuit.


What You'll Need

Equipment / Tools
  • Bucket
  • Channel-type pliers
  • Screwdrivers
  • Rag
  • Hacksaw

Materials
  • Plumber's putty
  • Basket strainer
  • Sink tailpiece
  • Continuous waste pipe


Instructions

1) Disconnect the Garbage Disposal

Unplug the garbage disposal from the wall outlet.
Place a bucket or other container under the  drain trap  to catch the water that drains from the pipes. Use pliers to loosen the slip nut at each end of the trap bend. Unthread the nuts and pull the trap straight down to remove it.
Loosen the slip nuts and remove the continuous waste pipe and the tee that connects to the discharge pipe of the disposal. 





2) Disconnect the Dishwasher if Needed

If you have a dishwasher, it is most likely connected to the garbage disposal. To remove the dishwasher drain hose, squeeze its hose clamp with pliers and shift it off of the hose end. If the clamp has a screw-drive, loosen it with a screwdriver and slip off the clamp. Grip the hose by hand, and rotate it back and forth as you pull it off of the disposal nipple.




3) Remove the Disposal Unit

Support the bottom of the disposal with one hand, or have a helper support it. Insert a screwdriver shaft into one of the ears on the lower mounting ring of the disposal, and turn it 1/4 turn counterclockwise to release the disposal from the mounting assembly. The disposal will come straight down so be ready to catch it.
What is left is the mounting assembly. To remove it, loosen and remove the screws between the upper and lower mounting rings. Take off the lower ring.
Use a flat screwdriver to pop the snap ring off of the cylinder of the sink flange that fits down through the sink hole. Slide the triangular backup flange from the sink flange, followed by the fiber gasket. Push up on the sink flange to break its seal with the sink, then lift the flange out from the top side of the sink.  Clean around the sink opening with a rag to remove gunk and old plumber's putty.




4) Install the Basket Strainer

Apply a ring of  plumber's putty  under the lip of the new basket strainer flange. Fit the strainer into the sink opening and make sure it is centered.
Under the sink, place the rubber washer onto the strainer flange, followed by the bottom mounting cup, then thread on the mounting nut. Using pliers, tighten the mounting nut until it is firm.
Remove the excess putty that oozes out from the strainer lip, on the top side of the sink.
Tip There are many types of basket strainers to choose from. Follow the installation instructions that come with your strainer.




5) Attach the Drain Tailpiece

Fit the new drain tailpiece onto the bottom end of the strainer basket, and secure it with the provided washer and slip nut.
Tighten the nut with pliers.
If you have a  dishwasher , you need to use a flanged branch tailpiece, which has an additional inlet for the dishwasher drain hose. Fit the drain hose onto the tailpiece inlet, and secure it with the hose clamp.
For some extra protection against leaks, place a few pinches of putty inside the nut between the tailpiece washer and basket strainer.




6) Install the Continuous Waste Pipe

Mark the continuous waste pipe for cutting to size by placing the elbow end of the pipe onto the tailpiece and marking where the other end (the straight end) will go into the tee on the drain assembly. Cut the pipe to length with a hacksaw. Fit the continuous waste pipe into place and secure it with slip nuts.  Tip The continuous waste pipe must have a slight downward slope from the tailpiece to the tee. You may have to add an extension to the tailpiece on the other sink basin and/or install a new tee to get all the parts to line up correctly.




7) Reassemble the Trap

Reassemble the trap and trap arm, securing the joints with slip nuts. Double-check all of the connections.  Fill up each sink basin, then let it drain while you watch the pipe connections for leaks. Tighten any leaky joints with pliers, but be careful not to overtighten and damage the nut.

Source: https://www.thespruce.com/how-to-remove-a-garbage-disposal-2718791

< Older Post

 Newer Post >
Chrome bathroom faucet with running water into a white sink.

10 Tips for Plumbing in an Older Home

October 17, 2025
Protect your older home’s charm and efficiency with expert plumbing contractors. Tim Rausch Plumbing LLC modernizes systems while preserving history.
Plumber repairs a bathroom sink, using a wrench.

How to Plan For a Plumbing Inspection

June 17, 2025
If you have a plumbing inspection coming up, here's what you need to do to plan before your local plumbing contractor visits your home.
Plumber with wrench fixing a leaky pipe under a sink. Water is spraying.

4 Things That Can Happen if You Ignore Your Plumbing Issues

July 22, 2024
When we ignore issues that need plumbing service, they often get to be much larger than what they originally were. Read on for what can happen!
Person using a wrench to work on plumbing under a kitchen sink.

3 Signs You Need to Call a Plumber

February 13, 2024
Are you experiencing plumbing issues? Read more to identify the signs you need to call a professional plumbing contractor.
Bright white kitchen with a wooden island, stainless steel appliances, and gray walls.

What to Do About a Leaking Refrigerator | The Spruce

September 27, 2022
A leaking refrigerator can feel like a drastic enough situation that you may think it's time to shop for a new fridge. But a leaking refrigerator doesn't necessarily mean that your fridge is on its way out .
Person plunging a white toilet with a black plunger.

Why Is My Toilet Overflowing? | The Spruce

September 27, 2022
An overflowing toilet is a relatively common problem that many people have had to deal with, but the commonality of this issue doesn't mean that it isn't a serious situation that needs to be handled quickly. The water from an overflowing toilet can soak into wood cabinetry, seep into the walls, or damage the floorboards, making it easier for mold, mildew, and rot to spread throughout the infrastructure of your home.
Hand turning dial on a washing machine, tools and level on shelf above.

How Long Does a Washing Machine Last?

September 27, 2022
A washing machine is an essential appliance to ensure that towels, linens, clothes, and bedding are regularly washed and sanitized. Whether you use a professional cleaner to launder your clothes, take laundry to a local laundromat, or use a personal washing machine in the comfort of your home, it's necessary for your personal hygiene to have clean clothes to wear to school, work, or when you meet up with friends.
Plumbing tools: shower head, faucet, valves, hoses, and sealing materials on a dark gray surface.

What a T&P Valve Is and How to Fix It | The Spruce

July 12, 2022
On the side or top of your water heater tank is a valve connected to a metal or plastic discharge tube pointing downward. The valve is called a T&P valve, or TPR valve, for "temperature and pressure relief."
Basement with white brick walls, open doors, water heater, and various pipes.

The Differences Between a Boiler and a Water Heater

July 12, 2022
Boilers and water heaters are important to the heating and water supply operations of the home. While they provide different services to the house—one for space heating , the other for domestic water usage—there is some slight overlap in the form of combined boiler/heater devices.
Empty room with brick walls, two windows, and a shiny, wet concrete floor.

Sump Pump Maintenance For Your Home

March 29, 2022
Most of the time, your home’s sump pump works efficiently and invisibly in the background. In areas with much groundwater, the sump pump's regular on and off sounds merge with the tapestry of your home life.
Show More