July 19, 2021

How to Fix a Leaky Hose Bib

Author

Update First Last in Content -> Business Text -> First Last field

Date

July 19, 2021

Share

While most indoor faucets now use cartridge-style mechanisms, outdoor faucets (called hose bibs), generally use an older, compression-style design. These faucets control water by means of a threaded stem with a rubber or neoprene washer on the end, which presses down against an opening in a metal valve seat to stop the flow of water. The handle of the faucet is attached to the inner stem, and it serves to lift and lower the stem to open and close the flow of water. Water is prevented from seeping up around the stem and out around the handle by several wrappings of waterproof packing string underneath the packing nut.


Fixing a leaky hose bib almost always involves one (or both) of two things:

  • Replacing the compression washer at the end of the inner valve stem. This will allow the stem to fully close down against the valve seat, keeping the hose bib from constantly dripping.
  • Replacing the packing string that is wrapped around the valve stem under the packing nut. This will prevent water from seeping up around the handle each time you use the faucet.


Most leaky hose bibs will be solved by one or both of these solutions, but it is possible that very old faucets may have cracks to the body of the faucet or serious damage to the valve seat, requiring that you replace the entire hose bib.


Tools and Supplies You Will Need

  • Channel-lock pliers or adjustable wrench
  • Faucet washer assortment
  • Screwdriver
  • Graphite packing string, or bonnet washer


Instructions

It's generally easiest to address both possible causes of leaking when servicing a hose bib—the stem washer and the handle packing string. Keep in mind that, sometimes, you're better off replacing the entire hose bib or frost-proof wall hydrant.


Tip:

When following the directions below, take care to always hold the hose carefully when working, particularly when removing parts. You don't want to loosen or even break piping downstream of where you're working.


1) Shut off the Water

Begin by shutting off the water to the hose bib. Usually, you will find a shutoff valve inside the house, controlling the water flow to the outdoor hose bib. Close this valve by turning the handle fully in the clockwise direction. If your hose bib does not have a shutoff valve, you can shut off the water supply to the entire house.


2) Remove the Handle

Use a screwdriver to remove the screw that holds the handle of the hose bib to the valve stem, then pull the handle off—a bit of wiggling may be required. Carefully set the handle and screw aside.


3) Unscrew the Packing Nut

Next, use a channel-lock pliers or adjustable wrench to unscrew the packing nut (sometimes called a bonnet nut) that secures the valve stem to the faucet body.


4) Remove the Valve Stem

Remove the valve stem from the faucet body. Usually this involves unscrewing the stem from the threaded body of the faucet; on some types, unscrewing it may require turning the stem in a clockwise direction rather than in the traditional counterclockwise fashion.


5) Replace the Stem Washer

Inspect the rubber or neoprene washer at the end of the valve stem. If it is hardened, cracked, or deformed, this is very likely the cause of your leaky faucet. Unscrew the brass screw holding the washer in place on the stem. Brass is a soft metal, so use care when unscrewing it. If the screw gets damaged, you may need to replace it—washer kits often come with replacement screws.


Choose an exact replacement for the old washer and and attach it to the end of the valve stem with a screw.


6) Replace the Packing String

Unwrap the old graphite or Teflon packing string from around the valve stem beneath the packing nut, then wrap several loops of new strong around the stem in a clockwise direction (as you look down at the stem from above). Alternately, you can use a fiber packing washer, which serves the same function as packing string. Larger washer kits usually include an assortment of packing washers.


7) Reassemble the Faucet

Thread the valve stem back into the body of the faucet, then thread the packing nut onto the top of the faucet. Tighten the packing nut slightly with a wrench, then put the faucet handle back onto the stem and check the operation of the faucet. Tightening the packing nut too much may make the handle hard to turn. The handle should turn freely, and you should be able to feel the washer compress down against the valve seat inside the faucet.


8) Test the Faucet

Turn the water back on and check the operation of the faucet, inspecting for leaks. If you experience any leaking around the handle, slightly tighten the packing nut a little further.


Source: https://www.thespruce.com/leaky-hose-bib-2718893

Chrome bathroom faucet with running water into a white sink.
October 17, 2025
Protect your older home’s charm and efficiency with expert plumbing contractors. Tim Rausch Plumbing LLC modernizes systems while preserving history.
Plumber repairs a bathroom sink, using a wrench.
June 17, 2025
If you have a plumbing inspection coming up, here's what you need to do to plan before your local plumbing contractor visits your home.
Plumber with wrench fixing a leaky pipe under a sink. Water is spraying.
July 22, 2024
When we ignore issues that need plumbing service, they often get to be much larger than what they originally were. Read on for what can happen!
Person using a wrench to work on plumbing under a kitchen sink.
February 13, 2024
Are you experiencing plumbing issues? Read more to identify the signs you need to call a professional plumbing contractor.
Bright white kitchen with a wooden island, stainless steel appliances, and gray walls.
September 27, 2022
A leaking refrigerator can feel like a drastic enough situation that you may think it's time to shop for a new fridge. But a leaking refrigerator doesn't necessarily mean that your fridge is on its way out .
Person plunging a white toilet with a black plunger.
September 27, 2022
An overflowing toilet is a relatively common problem that many people have had to deal with, but the commonality of this issue doesn't mean that it isn't a serious situation that needs to be handled quickly. The water from an overflowing toilet can soak into wood cabinetry, seep into the walls, or damage the floorboards, making it easier for mold, mildew, and rot to spread throughout the infrastructure of your home.
Hand turning dial on a washing machine, tools and level on shelf above.
September 27, 2022
A washing machine is an essential appliance to ensure that towels, linens, clothes, and bedding are regularly washed and sanitized. Whether you use a professional cleaner to launder your clothes, take laundry to a local laundromat, or use a personal washing machine in the comfort of your home, it's necessary for your personal hygiene to have clean clothes to wear to school, work, or when you meet up with friends.
Plumbing tools: shower head, faucet, valves, hoses, and sealing materials on a dark gray surface.
July 12, 2022
On the side or top of your water heater tank is a valve connected to a metal or plastic discharge tube pointing downward. The valve is called a T&P valve, or TPR valve, for "temperature and pressure relief."
Basement with white brick walls, open doors, water heater, and various pipes.
July 12, 2022
Boilers and water heaters are important to the heating and water supply operations of the home. While they provide different services to the house—one for space heating , the other for domestic water usage—there is some slight overlap in the form of combined boiler/heater devices.
Empty room with brick walls, two windows, and a shiny, wet concrete floor.
March 29, 2022
Most of the time, your home’s sump pump works efficiently and invisibly in the background. In areas with much groundwater, the sump pump's regular on and off sounds merge with the tapestry of your home life.
Show More